Loading... Please wait...

Shop By

H11 / H16 XenonDepot Xtreme LED Pro

$105.00
Quantity:

Product Description

Product Information

XenonDepot's NEW H11/H16 Xtreme LED Professional series of drop-in headlight bulbs are just better… right from the start. They incorporate today's most advanced components and features for unparalleled compatibility and performance. Hold one in your hand and you'll immediately discern their uncommonly high quality fit, finish, and feel: they're made of premium materials, formed and assembled with precise craftsmanship.

The next thing you'll notice is their all-new patented aluminum alloy leaf passive heat sink. Its compact and readily configurable design allows an easy fit in most any headlamp housing, and with its much larger contiguous thermal path, it does a better job shedding heat off the LEDs than past-type flexible mesh heat sinks. With no flex-mesh junctions to break and no motorized fans to make noise and electrical interference, clog, or fail, the superior heat rejection performance of the alloy leaf passive heat sink is retained over the long haul, for the full rated life of the emitters. That translates directly to excellent performance; the cooler LEDs can be kept, the higher their output.

The emitters themselves are genuine Lumileds ZES, three on each side of the light head, and this together with their undomed configuration means they closely replicate the size of the H11/H16 halogen filament. That means a better optical match than longer 4-emitter arrays or domed COB emitters, both of which violate the light source box your headlamp's optics were designed around, and because the high output comes from three chips rather than four, luminance is higher for better beam punch and spread.

Speaking of output: anyone can throw around inflated lumen numbers — and most vendors do. Some of those numbers have no basis in reality, they're just fibs. Some of them are somewhat accurate, but only immediately after the bulb is lit up in a cold chamber, without accounting for the significant droop that happens when improperly chosen emitters are inadequately cooled - don't drink the kool-aid! Our new H11/H16 Xtreme Pro bulbs are rated honestly: 1900 lumens stable, measured after the bulbs have been operating continuously for an hour in 60°C / 140°F heat. That's a rating that means (and gives you) exactly what it says. And with the 5500K color temperature of our emitters, we're giving you true white light, not artificially jacking up the lumen rating with a bunch of useless deep-blue light that can only attract unwanted police attention, not help you see.

There's more clean-sheet engineering where you can't see it: we've used copper circuit boards for optimal thermal conductivity, and our compact base means the rigid tail of the light head is only 25mm — much smaller than other LED bulbs on the market. You'll note the light head is remarkably compact, without bulky over-length that prevents many other LED bulbs from fitting all the way into many headlamps. And the light head is clockable, too, so you can fine-tune the output for the best optical match with any lamp you might install them in.

Truly, this is the top-performing LED bulb with OE-level quality and "fit it and forget it" durability and dependability.


Features

  • High Powered Philip Lumileds ZES LED Chips
  • 1750 Lumens Stable Per Bulb, 3500 Stable Lumens Total
  • 3000K Golden Yellow or 5500K Hyper White Color Temps
  • 50000 Hour Long Lifespan
  • Plug'n Play Design for Simple Installation
  • Waterproof, Shockproof, & Reverse Polarity Protection
  • 3 Year Warranty Directly Through Us

Includes

  • H11/H16 XenonDepot Xtreme LED Pro

Add-On Options

Anti-Flicker Cancellers (2) - Anti-Flicker Cancellers are needed if your vehicle is equipped with PWM (pulse-width-modulation) headlight technology.  Newer vehicles use PWM technology to increase bulb-life and reduce fuel consumption by sending a pulse of alternating voltages to the headlight bulb, as opposed to a stable 12V.  Factory installed halogen bulbs can handle this pulse system, as they won't dim before the next pulse of power is received.  However, a LED kit requires constant power, and will flicker like crazy if installed in a vehicle with a PWM headlight system.  Our Anti-Flicker Cancellers are specifically designed to ensure that your headlights don't flicker, and eliminate "lamp-out" error codes. We've tested this component on some of the most notoriously troublesome vehicles and the product works as designed!


Additional Information

Not sure what bulb size fits your vehicle?  Not a problem, CLICK HERE to pull up the correct bulb size for your vehicle.

If you have additional questions, please contact us by email at Sales@DynamicAppearance.com or call us at 678-622-7144.

Find Similar Products by Category

Back to Top